Filters Rainwater In The Downpipe
- Vertical 0.28 mm filter element integrated
- Effective separation of dirt particles
- 10-year guarantee
- Easy access to filter insert
- Extremely low maintenance
- High oxygen enrichment
- For roof areas up to 200 m² or 2,153 sq.ft. (tropical climate: 100 m² or 1,076 sq.ft.)
- Detached and semi-detached homes
- Rainwater for toilet flushing, washing machine, cleaning and garden irrigation
Overview
Easy To Maintain - Low-Maintenance Design
All WISY filter inserts are designed for very low maintenance. It is virtually impossible for debris or dirt to stick to their smooth, stainless-steel surface. As a result, the filter inserts have a long service life. Since the filter insert of both versions of the filter collector is always above ground level, it is easily accessible and protected against backflow in the sewer system. The filter insert is easily accessible, when necessary it can be removed from the housing in just a few simple steps for cleaning by a high-pressure cleaner or in the dishwasher.
The Downpipe Stays Clean
As with all WISY filters, the cross-sectional area for rainwater flow does not change at any point inside the filter, i.e. to ensure the free flow of water, the cross section is not restricted at any point. There is no risk of blockage even during torrential rainfall events which may flush large quantities of debris into the filter. Even a tennis ball could fall unobstructed through the filter. The hydraulic efficiency of the filter is excellent. In average rainfall, over 90% of the run-off rainwater will be filtered and collected.
Operating Principle and Applications
The RainCollector RS is installed in the vertical rainwater downpipe. It filters the runoff rainwater from the roof before discharging the filtered water through the outlet connection to the storage tank. Its filter insert is made of a fine stainless-steel mesh with a mesh size of only 0.28 mm. Leaves, moss and other debris entrained in the rainwater are reliably filtered out and flushed away through the downpipe to the soakaway or drain.
Rainwater cleansed by this filter is in a perfect condition for tank storage and for subsequent use in the washing machine or for flushing toilets and general household cleaning. No further filtering of the water is required.
Oxygen Enrichment
The filtering process by the RainCollector RS produces oxygen-rich water. The high oxygen content further enhances the water quality and inhibits the growth of undesirable anaerobic organisms.
Housing
The housing of RainCollector RS is made of UV-resistant polypropylene, suitable for tropical sunlight. The filter element is made of stainless steel. The RainCollector RS has inlet diameters directly fitting for 100 to 110 mm round pipes. Smaller downpipes can be connected with an adapter.
Housing
The housing of RainCollector RS is made of UV-resistant polypropylene, suitable for tropical sunlight. The filter element is made of stainless steel. The RainCollector RS has inlet diameters directly fitting for 100 to 110 mm round pipes. Smaller downpipes can be connected with an adapter.
10 Years Guaranty
The components are manufactured using the latest production techniques and are required to undergo the most rigorous quality control to ensure trouble-free operation. In the unlikely occurrence that parts do prove defective, WISY will guarantee replacement for 10 years.
Filter Collector Fs For Process Water Or Rainwater
- for Downpipes in detached and semi-detached homes Process water in industrial applications
- Clear Rainwater for toilet flushing, washing machine, house cleaning and garden irrigation
- Stainless Steel
- Roof areas up to 150 m² or 1,615 sq.ft. (tropical climate: 75 m² or 807 sq.ft.)
Overview
Operating Principle And Applications
The filter collector is installed in the vertical rainwater downpipe. It filters the runoff rainwater from the roof before discharging the filtered water through the outlet connection to the storage tank. Its filter insert is made of a fine stainless-steel mesh with a mesh size of only 0.28 mm. Leaves, moss and other debris entrained in the rainwater are reliably filtered out and flushed away through the downpipe to the soakaway or drain.
Rainwater cleansed by this filter is in a perfect condition for tank storage and for subsequent use in the washing machine or for flushing toilets and general household cleaning.
Filtering Capacity
The maximum flow rate through the filter collector is 4.2 litres per second (depending on the capacity of the downpipe). As with all WISY filters, the cross-sectional area for rainwater flow does not change at any point inside the filter, i.e. to ensure the free flow of water, the cross section is not restricted at any point. There is no risk of blockage even during torrential rainfall events which may flush large quantities of debris into the filter. The filter collector meets the requirements defined by EN 12056 / EN 752 and also conforms to DIN 1989. The hydraulic efficiency of the filter is excellent. With an inflow rate of 2 litres per second, for example, 90 % of the inflowing water is harvested as filtered water.
Filter Collector Fs For The Downpipe
The Filter Collector FS can be fitted anywhere in the downpipe. To install the filter collector, a section measuring 32 cm must be cut out of the downpipe and replaced by the filter collector. A projected roof area of 150 m² (1615 sq.ft.) can by drained by this version of the collector. The housing is available in stainless steel or copper so that it can be visually harmonised with the existing downpipe.
Easy To Maintain — Low-Maintenance Design
All WISY filter inserts are designed for very low maintenance. It is virtually impossible for debris or dirt to stick to their smooth, stainless-steel surface. As a result, the filter inserts have a long service life.
The filter insert is easily accessible and protected against backflow in the sewer system. When necessary, the insert can be removed from the housing in just a few simple steps for cleaning by a high-pressure cleaner or in the dishwasher.